* Some items are excluded due to manufacturer restrictions. Leaf springs sold individually or in pairs are excluded. Only one coupon code may be applied per order. Coupon codes may not be combined with other discount codes or applied to prior orders. Coupon codes may or may not apply to sale items, depending on the item.
This Carli Suspension CS-JKU-PF25-07 3 inch Pathfinder lift system for the Jeep Wrangler JKU 4wd models is a premium lift kit that will lift your vehicle enough to fit up to 35 inch x 12.5 inch tires. It is perfect for Wrangler owners wanting high performance for off-roading.
Featured in this lift system are 3 inch lift front coil springs that have a slightly reduced multi rate for better ride comfort along with 2.5 rear mult-rate coil springs that offer a great ride while supporting a load. Paired with the coil springs are King 2.5" Remote Reservoir Shocks. These custom Carli King shocks use a unique 17-4 stainless shaft that is machined and polished. Meaning there is no finish or coating to wear off. The 2.5 inch diameter body houses a custom piston designed for heavy-duty truck models. Remote reservoirs will increase oil capacity, giving better heat dispersion and performance in extreme conditions.
To keep the front axle centered properly an adjustable front track bar is included. In typical Carli fashion this bar has features that are not found in other track bars. This includes 3/8 inch DOM construction that allow for use of a 1" x 7/8" FK bearing heim joint with a huge 1" shank.
Features & Benefits:
3 inch front lift / 2.5 inch rear lift
Premium lift kit optimized for on-road road quality, towing and slow to mid speed off-roading
Front linear rate coil springs - with reduced linear rate to improve ride quality
Rear multi rate coil springs - with reduced multi rate to improve ride quality and support a load
King 2.5 Remote Resi Front and Rear Shocks - 2.5" diameter aluminum body with remote reservoir and exclusive 17-4 stainless steel shaft that is machined and polished
Remote reservoir increases oil capacity for better heat management and better overall performance
Front Travel = 10.1" / Rear Travel = 10.2"
Adjustable track bars - keeps front axle centered and dampens vibrations. Uses FK heim joints
Lifetime warranty on components, 1 year warranty on shocks
Allows use of up to 35 inch x 12.5 tires
Components Included:
CS-JK25LRC-F-07: 3" Front Linear Rate Coil Springs
CS-JK25MRC-R-07: 2.5" Rear Mult Rate Coil Springs
CS-JKU-PF25SPKG-25-07: Carli Tuned King 2.5 Remote Resi Front and Rear Shocks
CS-JATB-07-F: Front Adjustable Track Bar
CS-JATB-07-R: Rear Adjustable Track Bar
CS-JATB-07-R-RISER: Rear Adjustable Track Bar Riser
CS-JEL-07-F: Front Sway Bar End Links
CS-JEL-07-R Rear Sway Bar End Links
CS-JBBLKIT-07 Extended Brake Lines, Guides and E-Brake Drop
CS-JBSF-07-TALL: Front Bump Riser, tall
CS-JBSR-07: Rear Bump Riser
Optional Upgrades - While not required, Carli Suspension offers additional components to further enhance ride quality and / or performance of this leveling system. These can be found by scrolling down the page to the table below.
Carli Suspension's CS-JKCA-07-KIT Front and Rear Control Arm Kit for the Jeep Wrangler JKU is designed for models lifted 3 inches to correct caster and improve articulation capability.
These arms are crafted from high-quality US Steel and feature reinforced joint housings with strategically positioned zerk fittings, making the greasing process effortless.
The joints themselves are engineered in-house, featuring precision-machined 17-4 Stainless Ball-centers that pivot within our exclusive urethane races. These races incorporate built-in grease channels, ensuring uniform grease distribution, prolonging the lifespan of the joints, and ensuring quiet operation.
To prevent any unwanted rattling or rotation while preserving articulation capability, rubber joint washers, also known as wobble stoppers, are preinstalled at necessary points.
With these arms, you can simplify your setup. Pair them with our recommended 35″ tires (or 37″ with rear pinch weld trimming), and you'll achieve corrected caster angles. Your front and rear suspension will move smoothly without binding, thanks to the friction-free spherical joints, enhancing your driving experience.
Corrects caster on 3" suspension lift kits
Friction free, serviceable 17-4 Stainless Joints
Gusseted Joint Housings
Zerk fittings for ease of servicing
Fixed length
Includes 8 arms: Front and rear, uppers and lowers
Carli provides a Limited Lifetime Warranty
Read More
Carli Suspension's CS-JKCA-07-KIT Front and Rear Control Arm Kit for the Jeep Wrangler JKU is designed for models lifted 3 inches to correct caster and improve articulation capability.
These arms are crafted from high-quality US Steel and feature reinforced joint housings with strategically positioned zerk fittings, making the greasing process effortless.
The joints themselves are engineered in-house, featuring precision-machined 17-4 Stainless Ball-centers that pivot within our exclusive urethane races. These races incorporate built-in grease channels, ensuring uniform grease distribution, prolonging the lifespan of the joints, and ensuring quiet operation.
To prevent any unwanted rattling or rotation while preserving articulation capability, rubber joint washers, also known as wobble stoppers, are preinstalled at necessary points.
With these arms, you can simplify your setup. Pair them with our recommended 35″ tires (or 37″ with rear pinch weld trimming), and you'll achieve corrected caster angles. Your front and rear suspension will move smoothly without binding, thanks to the friction-free spherical joints, enhancing your driving experience.
Corrects caster on 3" suspension lift kits
Friction free, serviceable 17-4 Stainless Joints
Gusseted Joint Housings
Zerk fittings for ease of servicing
Fixed length
Includes 8 arms: Front and rear, uppers and lowers