* Some items are excluded due to manufacturer restrictions. Leaf springs sold individually or in pairs are excluded. Only one coupon code may be applied per order. Coupon codes may not be combined with other discount codes or applied to prior orders. Coupon codes may or may not apply to sale items, depending on the item.
This Carli Suspension CS-DC20-1419-D-AR Commuter 3.25 inch lift system for the Dodge Ram 2500 4wd diesel models with factory rear air suspension is a premium lift kit that will lift your vehicle enough to fit up to 37 inch x 12.5 inch tires. It is perfect for Ram owners wanting the best on-road ride quality and are not planning on much off-roading.
Featured in this lift kit system are 3.25 inch lift front coil springs that have a slightly reduced linear rate for better ride comfort. Paired with the coil springs are Fox 2.0 Performance Series shock absorbers. These shocks use a 2" diameter 6063 aluminum anodized body for corrosion resistance and great heat dispersion. An internal reservoir with 5/8 inch diameter hardened steel chrome plated shaft are also featured.
To keep the front axle centered properly an adjustable front track bar is included. In typical Carli fashion this bar has features that are not found in other track bars. This includes 3/8 inch DOM construction that allow for use of a 1" x 7/8" FK bearing heim joint with a huge 1" shank.
Radius arm drop brackets lower the factory radius arms which rotates the axle back to factory angles to maintain proper caster and geometry. Made from 1/4 inch cold rolled steel these heavy duty brackets will provide a solid link between the arms and chassis.
In the rear Carli uses a 2 inch spacer for the factory air bags made of heavy gauge steel. Fabricated rear bump stop spacers are included to drop the factory stops 2 inches. Also included are extended machined sensor links for the factory air bags to continue to function properly, extended sway bar endlinks to eliminate binding and a rear track bar bracket to keep the axle centered.
Features & Benefits:
3.25 inch front lift / 2 inch rear lift
Premium lift kit optimized for on-road ride quality
Front linear rate coil springs - with reduced linear rate to improve ride quality
Fox 2.0 IFP Front and Rear Shocks - 2" diameter aluminum body with internal reservoir
Shocks are fully serviceable and rebuild-able
Designed to greatly improve ride quality for on-road use
Adjustable track bar - keeps front axle centered and dampens vibrations. Uses FK heim joint with huge 1" shank
Radius arm drop brackets keep proper front caster
Rear heavy gauge steel spacers lift the rear air bags
Factory air suspension keeps full functionality
Front Travel = 9.6" / Rear Travel = 9" (50% more suspension travel than stock)
Lifetime warranty on components, 1 year warranty on shocks
Allows use of up to 37 inch x 12.5 tires
Components Included:
CS-DLRC-14-D: Front Liner-Rate Coil Springs
CS-DC20SPKG-14-D-AR: Carli Tuned Fox 2.0 IFP Shocks - Front and Rear
CS-DATB-1419: Adjustable Track Bar w/stabilizer bracket
CS-DRAD-14: Radius Arm Drops
CS-DFBD-1: Front Bump Stop Drops
CS-DCM-20-HK: Transmission Crossmember w/hardware
CS-DPRBDROP-14-R: Rear Track Bar Drop Bracket
CS-DEL-R-14: Rear Sway Bar End Lins
CS-DAR-14-BLOCK: Rear airbag spacers
CS-DRBD-2.5: Rear Bump Stop Drop Kit
CS-DAR-14-LINK: Extended Sensor Link
Optional Upgrades - While not required, Carli Suspension offers additional components to further enhance ride quality and / or performance of this leveling system. These can be found by scrolling down the page to the table below.
Required Sway Bar Selection - While Carli does not include a front sway bar correction in this kit it is required to install this lift kit properly. The billet aluminum drop bracket kit works great as a more economical solution. However, for truck owners wanting a HUGE improvement in ride quality the Carli Torsion Sway Bar is your solution and is an amazing upgrade. Designed to allow the front suspension to move more freely without giving up control.
Important Notes1. Compatible with factory rear air suspension only.
2. Fits with diesel engine only
3. Does not fit Power Wagon models.
4. While Carli does not include a front sway bar correction in this kit it is required to install this lift kit properly (see options below)
Carli's solid billet aluminum Sway Bar Drops are designed to return your lifted vehicle's sway bar to factory angles. Crafted using cutting-edge machining technology, these drops guarantee precise alignment of your Sway Bar and also create sufficient space for coil clearance.
Constructed out of solid machined billet aluminum
Designed for factory sway bar
Hard-anodized construction for corrosion resistance
Eliminate binding that can occur when sway bar is not properly dropped on lifted models
Read More
Carli's solid billet aluminum Sway Bar Drops are designed to return your lifted vehicle's sway bar to factory angles. Crafted using cutting-edge machining technology, these drops guarantee precise alignment of your Sway Bar and also create sufficient space for coil clearance.
Constructed out of solid machined billet aluminum
Designed for factory sway bar
Hard-anodized construction for corrosion resistance
Eliminate binding that can occur when sway bar is not properly dropped on lifted models
For optimal ride quality, the Torsion Sway Bar is a great choice. This enhanced sway bar effectively reduces the front sway bar's spring rate, resulting in a ride experience akin to independent suspension.
Easily the best "bang for the buck" upgrade for ride quality
Allows front suspension to move freely without giving up control
Read More
For optimal ride quality, the Torsion Sway Bar is a great choice. This enhanced sway bar effectively reduces the front sway bar's spring rate, resulting in a ride experience akin to independent suspension.
Easily the best "bang for the buck" upgrade for ride quality
Allows front suspension to move freely without giving up control
This bolt-on replacement for the factory stabilizer is adjustable ranging from 70 to 200 psi, allowing you to achieve a neutral steering feel at 70 psi or counter the natural left-hand pull often associated with tires like Nitto Trail Grapplers at 200 psi. For those seeking the pinnacle of steering control, consider pairing it with the Carli High Mount for the ultimate dual, opposing steering stabilizer setup that offers infinite adjust-ability.
Direct bolt-in replacement
Corrects left tire pull, adjustable
Read More
This bolt-on replacement for the factory stabilizer is adjustable ranging from 70 to 200 psi, allowing you to achieve a neutral steering feel at 70 psi or counter the natural left-hand pull often associated with tires like Nitto Trail Grapplers at 200 psi. For those seeking the pinnacle of steering control, consider pairing it with the Carli High Mount for the ultimate dual, opposing steering stabilizer setup that offers infinite adjust-ability.
This is a bolt-in companion to the Carli Low-Mount Steering Stabilizer. With an adjustable range from 70 to 200 psi, it allows you to achieve a neutral steering response at 70 psi or counteract the natural right-hand pull typically associated with tires like Toyo Mud Terrains at 200 psi. Please note that this is not a primary stabilizer and must be used in conjunction with either a Carli or OEM lower stabilizer in the factory location for optimal performance.
Simple, Bolt-in Installation
Corrects right tire pull, adjustable
Combines with Low-Mount for opposing stabilization
Read More
This is a bolt-in companion to the Carli Low-Mount Steering Stabilizer. With an adjustable range from 70 to 200 psi, it allows you to achieve a neutral steering response at 70 psi or counteract the natural right-hand pull typically associated with tires like Toyo Mud Terrains at 200 psi. Please note that this is not a primary stabilizer and must be used in conjunction with either a Carli or OEM lower stabilizer in the factory location for optimal performance.
Simple, Bolt-in Installation
Corrects right tire pull, adjustable
Combines with Low-Mount for opposing stabilization
These heavy duty radius arms are a huge strength improvement over factory arm. Featuring 17-4 Stainless Spherical Joints that eliminates the factory bushings that have the kinetic “kick” as they wind up with energy.
12" Quad Wrap Limit Straps, For 3.25" Lift Systems
Read More
These heavy duty radius arms are a huge strength improvement over factory arm. Featuring 17-4 Stainless Spherical Joints that eliminates the factory bushings that have the kinetic “kick” as they wind up with energy.