Save $25 to $500 w/code! - details
3" 1994-2002 Dodge Ram 2500/3500 4wd (w/Diesel Engine) Commuter Lift System by Carli Suspension Brand: Carli Suspension | SKU: CS-D3-COM-CSD-94-D
$1710
- +
1710
3" 1994-2002 Dodge Ram 2500/3500 4wd (w/Diesel Engine) Commuter Lift System by Carli Suspension
$1,710.00
3" 1994-2002 Dodge Ram 2500/3500 4wd (w/Diesel Engine) Commuter Lift System by Carli Suspension
$1,710.00
Trusted Experts Since 1994, Top Rated service
Got Questions? We can help!
888-452-2548
Got Questions? We can help!
888-452-2548
Product Description
This Carli Suspension CS-D3-COM-CSD-94-D 3 inch Commuter lift system for the Dodge Ram 2500 / 3500 4wd diesel models is a premium lift kit that will lift your vehicle enough to fit up to 35 inch x 12.5 inch tires. It is perfect for Ram owners wanting the best on-road ride quality and are not planning on much off-roading. Featured in this leveling system are 2.5 inch lift front coil springs that have a slightly reduced linear rate for better ride comfort. Paired with the coil springs are Carli SPEC 2.0 IFP shock absorbers. These shocks use a 2" diameter 6063 aluminum anodized body for corrosion resistance and great heat dispersion. An internal reservoir with 5/8 inch diameter hardened steel chrome plated shaft are also featured. In the rear you have the choice of no lift or upgrade to the Carli progressive add-a-pack to replace the factory overload spring to improve comfort, traction and handling. Features & Benefits:
Components Included:
Optional Upgrades - While not required, Carli Suspension offers additional components to further enhance ride quality and / or performance of this leveling system. These can be found by scrolling down the page to the table below. |
| Important Notes1. Fits with diesel engine only 2. While Carli does not include a front sway bar correction in this kit it is required to install this lift kit properly (see options below) |
Available Options
Front Sway Bar (required)
1 of 2 options
Ram 2500 / Ram 3500 1998.5-2009 Dodge 4WD (w/0-3" of Front Lift) Extended End Links by Carli SuspensionRead More
Carli Suspension's Front Sway Bar End Links for the Dodge Ram 2500 / 3500 are crafted from premium 17-4 stainless steel. These adjustable end links guarantee a lifetime of use due to their superior material.
- Adjustable length allows for fitment from stock height up to 3 inches of front lift
- 17-4 Machined Stainless Steel
- Eliminates sway bar binding on lifted models
- 10mm sway bar end links
- 1/2" FK Chromoly Rod end
- Carli provides a Limited Lifetime Warranty
Carli Suspension's Front Sway Bar End Links for the Dodge Ram 2500 / 3500 are crafted from premium 17-4 stainless steel. These adjustable end links guarantee a lifetime of use due to their superior material.
- Adjustable length allows for fitment from stock height up to 3 inches of front lift
- 17-4 Machined Stainless Steel
- Eliminates sway bar binding on lifted models
- 10mm sway bar end links
- 1/2" FK Chromoly Rod end
- Carli provides a Limited Lifetime Warranty
$265
2 of 2 options
Ram 2500 / Ram 3500 1994-1998 Dodge 4WD (w/0-3" of Front Lift) Extended Front Sway Bar End Links by Carli SuspensionRead More
Carli Suspension's Front Sway Bar End Links for the Dodge Ram 2500 / 3500 are crafted from premium 17-4 stainless steel. These adjustable end links guarantee a lifetime of use due to their superior material.
- Adjustable length allows for fitment from stock height up to 3 inches of front lift
- 17-4 Machined Stainless Steel
- Eliminates sway bar binding on lifted models
- 1/2" FK Chromoly Rod end
- Carli provides a Limited Lifetime Warranty
Carli Suspension's Front Sway Bar End Links for the Dodge Ram 2500 / 3500 are crafted from premium 17-4 stainless steel. These adjustable end links guarantee a lifetime of use due to their superior material.
- Adjustable length allows for fitment from stock height up to 3 inches of front lift
- 17-4 Machined Stainless Steel
- Eliminates sway bar binding on lifted models
- 1/2" FK Chromoly Rod end
- Carli provides a Limited Lifetime Warranty
$265
Rear Lift Method
Ram 2500 / Ram 3500 1994-2002 Dodge 4WD (w/Diesel engine) 1" Progressive Rear Add-A-Pack Kit by Carli SuspensionRead More
These Carli Suspension Premium 5-leaf Progressive Add A Pack Kit for the Dodge Ram 2500 / 3500 is designed to enhance both performance and comfort. By replacing the lower overload leaf with 5 thinner gauge springs, Carli has maintained the factory load capacity while significantly improving mobility. The benefits of this upgrade are immediately noticeable. Experience improved traction and predictability, making your off-road adventures smoother and more enjoyable. Even when fully loaded, you'll notice a much-improved ride quality.
Features & Benefits:
- Replaces lower overload spring
- More predictability and spring progression keeps tires planted
- Includes Driver & Passenger Side Add-a-Packs, U-Bolts and Center Pins
- Provides 1" total rear lift, works great with Carli 3 inch kits
- Carli provides a Limited Lifetime Warranty
These Carli Suspension Premium 5-leaf Progressive Add A Pack Kit for the Dodge Ram 2500 / 3500 is designed to enhance both performance and comfort. By replacing the lower overload leaf with 5 thinner gauge springs, Carli has maintained the factory load capacity while significantly improving mobility. The benefits of this upgrade are immediately noticeable. Experience improved traction and predictability, making your off-road adventures smoother and more enjoyable. Even when fully loaded, you'll notice a much-improved ride quality.
Features & Benefits:
- Replaces lower overload spring
- More predictability and spring progression keeps tires planted
- Includes Driver & Passenger Side Add-a-Packs, U-Bolts and Center Pins
- Provides 1" total rear lift, works great with Carli 3 inch kits
- Carli provides a Limited Lifetime Warranty
$645
Control Arms
1 of 2 options
Ram 2500 / Ram 3500 1994-1998 Dodge 4WD (w/3" Suspension Lift) Extended Control Arms by Carli SuspensionRead More
Carli Suspension's Extended Control Arm Kit for the Dodge Ram 2500 / 3500 are designed for models lifted 3 inches in the front to re-center the front axle.
- Re-centers front axle on 3" suspension kits
- Fits 12mm upper/14mm lower hardware - Factory bolt shank diameter
- Joint assembly machined with a 17-4 Stainless ball center
- Includes Energy Suspension bushings
- Box 0.120" wall mild steel construction
- Includes 4 Arms, 2 upper, 2 lower
- Zerk fittings for ease of servicing
- Serviceable, Vibration damping joints with stainless ball centers
- Carli provides a Limited Lifetime Warranty
Carli Suspension's Extended Control Arm Kit for the Dodge Ram 2500 / 3500 are designed for models lifted 3 inches in the front to re-center the front axle.
- Re-centers front axle on 3" suspension kits
- Fits 12mm upper/14mm lower hardware - Factory bolt shank diameter
- Joint assembly machined with a 17-4 Stainless ball center
- Includes Energy Suspension bushings
- Box 0.120" wall mild steel construction
- Includes 4 Arms, 2 upper, 2 lower
- Zerk fittings for ease of servicing
- Serviceable, Vibration damping joints with stainless ball centers
- Carli provides a Limited Lifetime Warranty
$835
2 of 2 options
Ram 2500 / Ram 3500 1998.5-2002 Dodge 4WD (w/3" Suspension Lift) Extended Control Arms by Carli SuspensionRead More
Carli Suspension's Extended Control Arm Kit for the Dodge Ram 2500 / 3500 are designed for models lifted 3 inches in the front to re-center the front axle.
- Re-centers front axle on 3" suspension kits
- Fits 14mm upper/16mm lower hardware - Factory bolt shank diameter
- Joint assembly machined with a 17-4 Stainless ball center
- Includes Energy Suspension bushings
- Box 0.120" wall mild steel construction
- Includes 4 Arms, 2 upper, 2 lower
- Zerk fittings for ease of servicing
- Serviceable, Vibration damping joints with stainless ball centers
- Carli provides a Limited Lifetime Warranty
Carli Suspension's Extended Control Arm Kit for the Dodge Ram 2500 / 3500 are designed for models lifted 3 inches in the front to re-center the front axle.
- Re-centers front axle on 3" suspension kits
- Fits 14mm upper/16mm lower hardware - Factory bolt shank diameter
- Joint assembly machined with a 17-4 Stainless ball center
- Includes Energy Suspension bushings
- Box 0.120" wall mild steel construction
- Includes 4 Arms, 2 upper, 2 lower
- Zerk fittings for ease of servicing
- Serviceable, Vibration damping joints with stainless ball centers
- Carli provides a Limited Lifetime Warranty
$835
Vehicle Fitment
| Make | Dodge |
|---|---|
| Model | Ram 2500, Ram 3500 |
| Year Fitment | 2002, 2001, 2000, 1999, 1998, 1997, 1996, 1995, 1994 |
| 2WD/4WD | 4WD |
Tech Specs
| Manufacturer | Carli Suspension |
|---|---|
| Manufacturer Part Number | CS-D3-COM-CSD-94-D |
| Item Number | car_cs-d3-com-cs-94-d |
| Product Line | Lift Kits |
| Lift Height | 3 inch |
WARNING : Cancer and Reproductive Harm. www.p65warnings.ca.gov/
